Edit an Automation
availability
Platform: | WebMobile |
---|---|
Plan Type: | BasicEssentialPremiumEnterprise |
User Type: | RequesterFull UserAdministrator |
Edit an Automation​
To edit an automation:
-
From the sidebar, select Automations.
-
From the list, navigate to the automation that you want to edit.
-
Select the automation to open it.
-
On the automation details page, select Edit.
-
Make any updates as needed to the meter reading trigger fields.
-
Make any updates as needed to the conditions.
-
Make any updates as needed to the actions.
-
Select Save Changes.
The automation is now updated.
Triggers​
The following triggers are available for a workflow automation:
Field | Creates an Action When |
---|---|
Is above | The value entered is higher than the specified threshold value. For example, a temperature reaching above 10 degrees Celsius. |
Is below | The value entered is lower than the specified threshold value. For example, a temperature reaching below 10 degrees Celsius. |
Is equal to | The value entered is equal to the specified threshold value. For example, a temperature reaching exactly 10 degrees Celsius. |
Is not equal to | The value entered is not equal to the specified threshold value. For example, a temperature falling below a threshold of 10 degrees Celsius. |
Is above or equal | The value entered is higher than or equal to the specified threshold value. For example, a temperature reaching 10 degrees Celsius or above. |
Is below or equal | The value entered is lower than or equal to the specified threshold value. For example, a temperature reaching 10 degrees Celsius or below. |
Is between | The value entered is between the range value set. For example a temperature reaching between 10 to 20 degrees Celsius. |
Increases by (from last trigger) | Every time the meter reading increases by the specified threshold value. After you set Increases by (from last trigger), you can set the Initial Trigger Value at which an action (for example, a work order) needs to be triggered. For example, a truck has 0 miles on its odometer when you create a meter and you set up the Increases by (from last trigger) to occur every 5,000 miles. However, it is only necessary to service the truck after 15,000 miles onwards, so you can set the first Initial Trigger Value to start at 15,000 miles. |
Decreases by (from last trigger) | Every time the meter reading decreases by the specified threshold value. After you set Decreases by (from last trigger), you can set the Initial Trigger Value at which an action (for example, a work order) needs to be triggered. |
Increases by (from last reading) | The difference between the last reading and the one before increased by the specified threshold value. |
Decreases by (from last reading) | The difference between the last reading and the one before decreased by the specified threshold value. |
Conditions​
The following conditions are available for a workflow automation:
Condition | Description |
---|---|
Between Certain Hours | For example, between 10:00 pm and 12:00 am. |
Actions​
The following actions are available for a workflow automation:
Action | Description |
---|---|
Create a Work Order | For more information, see Create a Work Order. |
Change Asset Status | Choose your Asset from the drop-down, then choose a status from the Set status to drop-down and then choose a Downtime Type. Optionally, add a note. |
Send a Notification | Enter email addresses or team names. Fill in the following additional fields for notifications:
|